While there remains some uncertainty and inertia over the future of my Australian model railway layout (Winmar), I am pleased to report that I will be attending the New Zealand Model Railway Convention in Christchurch in April.
I love New Zealand and over the years have visited many places on the North Island, and one great trip to the Marlborough region at the top of the South Island. Christchurch has been one city I have been keen to visit and I will spend a week there over Easter at the Convention and generally just looking around. I will even get to visit Ironhorse Hobbies in Christchurch, an advertiser in the Australian Model Railway Magazine.
I have also been a member of the New Zealand Model Railway Guild for some years now. I hope to meet some Guild members at the Convention in Christchurch.
Many New Zealand prototype modellers model to 3/16" to the foot scale (S scale) and I am keen to see some layouts in this scale during the layout tours. The New Zealand prototype railway has a track guage of 3'6'', a pretty common narrow gauge track for Australasia.
I have often thought that S scale is a good compromise between HO and O scales. In Australia, S scale is popular among prototype modellers of the Western Australian Government Railways (WGR) and Queensland Railways (QR). The Western Australia and Queensland prototype railways have historically been narrow gauge (3'6") railways and S scale modelling (Sn3 1/2) allows for the use of the common HO scale (16.5mm) track. Interestingly, the narrow gauge (3'6") prototype modellers in South Australia and Tasmania have generally favoured HO scale and a model railway gauge of HOn3 1/2 (12mm). I have no idea why these geographic differences have occurred in Australia but I'd be keen for someone to put forward an intelligent explanation!
At the same time, there have been some excellent smaller scale (N120, for example) New Zealand prototype models featured in the Guild's New Zealand Model Railway Journal. While I readily admit that the smaller scale is a tad too small for me these days, I can certainly appreciate good quality modelling in any scale and in any prototype.
Registration is still open for the New Zealand Model Railway Convention. The Convention takes place in the first week of April. The early bird rate (NZ $80) is available until 28th February and after that the rate increases to NZ $100. Unfortunately for us overseas people, credit card payments can't be made. However, payment can still be made by direct credit (details on registration form) or by going to your local Australian bank branch and getting a cheque drawn in NZ dollars.
If any other Aussies are interested in a different modelling experience, please visit the Convention website for all details and a registration form. Maybe I will see you there...
Tuesday, 23 February 2010
Thursday, 11 February 2010
Update
It has been a while since my last blog post. In that time, I have been sorting through all the stuff that has congregated in the garage since our house move late last year. Unfortunately, the garage has become the place to put things when they either don't fit in the house, or where we don't know where to actually put things in the house!
To add to the mess, we had some rain last week and the garage sprung a couple of leaks that caused a few problems, but fortunately not damaging anything of importance.
I am experimenting with shelf support systems at the moment. I am trialling some slotted metal shelving brackets along a short length of wall on one side of the garage. On another wall, I am experimenting with a heavy length of timber dyna-bolted to the brickwork from which an arc shaped piece of plywood is nailed to support the layout benchwork. It was the method used for David Low's previous layout, Parkes, and looks a sturdy and relatively cheap method of layout support.
I'd like to get my layout, Winmar, out of the way too. As mentioned in previous posts, the layout is a single baseboard 8' x 16' and weighs a ton! It currently sits sideways and lengthways up against one of the outer walls of the garage. I need to get some mates around to move the layout outside to the driveway and then look at where to make the saw cuts to try and save the station area for a possible exhibition layout. The layout as it currently exists will not really fit and it no longer suits my model railway preference for operations. It has to go, but perhaps some salvage work can be done.
In the meantime, I also have some solid reading to do with recent issues of AMRM, Model Railway Journal, Model Railroader, and Model Railroad Planning 2010 to get through.
To add to the mess, we had some rain last week and the garage sprung a couple of leaks that caused a few problems, but fortunately not damaging anything of importance.
I am experimenting with shelf support systems at the moment. I am trialling some slotted metal shelving brackets along a short length of wall on one side of the garage. On another wall, I am experimenting with a heavy length of timber dyna-bolted to the brickwork from which an arc shaped piece of plywood is nailed to support the layout benchwork. It was the method used for David Low's previous layout, Parkes, and looks a sturdy and relatively cheap method of layout support.
I'd like to get my layout, Winmar, out of the way too. As mentioned in previous posts, the layout is a single baseboard 8' x 16' and weighs a ton! It currently sits sideways and lengthways up against one of the outer walls of the garage. I need to get some mates around to move the layout outside to the driveway and then look at where to make the saw cuts to try and save the station area for a possible exhibition layout. The layout as it currently exists will not really fit and it no longer suits my model railway preference for operations. It has to go, but perhaps some salvage work can be done.
In the meantime, I also have some solid reading to do with recent issues of AMRM, Model Railway Journal, Model Railroader, and Model Railroad Planning 2010 to get through.