Sydney Model Railway Exhibition 2016

For me, the Labor Day October long weekend is synonymous with the Sydney Model Railway Exhibition at Liverpool. And so it was that I made the 2.5 hour journey from Canberra to Liverpool for this annual exhibition.

I had purchased my ticket online in the preceding week. However, when I arrived around late morning on Saturday the general admission queue was very small. Nevertheless, I gained entry straight away and made my way around the perimeter of the main hall. The majority of the trade stands occupied this space and so my circumnavigation took a wee while as I looked for new products, examples of pre-production models, and any bargains. Austrains and Trainorama seemed to have some decent specials, and I think Southern Rail Models may have had some discounted L class locos, but that was pretty much it as far as I could see. The SDS Models upcoming Speed-E-Gas tanker was on display and looked terrific, as did the selection of models in the showcases from Auscision and Bergs. Other notable commercial stands included Orient Express from Adelaide, Runway 13 from Canberra, ARHS books, Anton's Trains, Casula Hobbies, Chucks Ballast, Railroad Model Craftsman, Train World, Kerroby Models, Eureka Models, Pallas Hobbies, and IDR Models.

As for the layouts, there were about 25 or so. Most of the layouts I had seen before, but that shouldn't surprise as I have visited quite a few exhibitions over the years.

Here are a few representative layouts from the exhibition.

Upon entering the exhibition, there was the familiar live steam Railways in the Garden layout. The railway uses two gauges of running tracks - 45mm and 32mm - and the locos are fired by either gas, methylated spirits, or coal.

Bethungra Spiral (HO, NSW) from the Epping Model Railway Club was on display and the scenery looked superb. This layout offers a different design to the usual exhibition layout which are mostly based on station and yard scenes.

Yendys (HO, Australian) made the journey up to Liverpool from Canberra. This layout has been around the exhibition circuit quite a while now. I love the composition of the layout, and the bridge scene is always a stand-out. Colour light signalling had been added this time around.

Oddwalls (HO, NSW), another exhibition regular, features a typical country town and distinctly Australian scenery. Here a 32 class engine hauls a rake of four-wheeled goods wagons.

Mungo Scotts (HO, NSW) has also been on the exhibition circuit for a while now. The layout was built and is exhibited by the Sydney Model Railway Society. The photo below shows a Beyer-Garratt locomotive on the Metropolitan Goods line with a run-through train.

Goulburn (HO, NSW/Australian) from the Guildford Model Railway Group, was making its second exhibition appearance. This layout has proved inspirational to a couple of my model railway friends; something that makes attending exhibitions worthwhile. The photo below captures the Sydney-bound XPT about to depart Goulburn railway station.

Waterfall (HO, NSW) from the Illawarra Model Railway Association, was tucked away in an annex off the main hall (across from SDS Models). This layout is a quality exhibit and features some great scenery, especially around the station precinct.

Broxburn Sidings (OO) was also off the main hall. This layout is a lovely compact layout featuring industrial sidings with plenty of opportunity for shunting action.

Kyogle (N scale, NSW) from Peter Boorman was a nicely crafted rural NSW layout featuring a station, yard and bridge scene. This layout will be featured in the December 2016 issue of the Australian Model Railway Magazine.

Dunblurtin (N scale, NSW) was first exhibited by its previous owner way back in 1990! This layout has stood the test of time with some nice scenery, buildings, and plenty of train action.

Industry Lane (00, British) was my favourite layout from the Epping Model Railway Exhibition in June. It remains one of my favourite layouts. This layout demonstrates that you can still have a great model railway even in a relatively small amount of space. The buildings and scenic composition are superb. More information about the layout and the community group can be found at the following web address: www.platform1mrc.com

Another small layout, this time in G scale, was Whiskey Springs. This layout was a highly detailed logging-style model railway that featured exquisite scenery.

Valley Heights (O scale, NSW) is another layout I have seen before. This time I paid particular attention to the roundhouse (instead of the elevated coal stage which probably gets more than its fair share of attention). The roundhouse has great atmospheric charm generated from the larger modelling scale.

While many of the layouts I had seen before, I still enjoyed the exhibition and catching up with fellow modellers from Sydney, Canberra, and rural NSW. As Canberra does not have a dedicated model railway shop, the Liverpool exhibition was a great opportunity to check out a wide range of retailers all in the one spot. Sometimes modellers don't always appreciate the convenience of having a large range of commercial retailers all in the one place at the one time. That said, I do wonder whether there are sufficient new layouts being constructed to keep exhibitions fresh and engaging for both the public and for existing railway modellers. Perhaps this is a topic to keep for another time...

Sydney Model Railway Exhibition 2011 Report

Another Sydney Model Railway Exhibition is over. The three day event will be on again next year - the 50th!

There was a good selection of layouts and plenty of commercial stands at the exhibition.  I did feel that there were less layouts than usual but this certainly increased the aisle spacing and made it easier to walk around than in previous years. And like previous years, the Saturday morning crawl to get into the exhibition was slow. Note to exhibition organisers: is it possible to have four ticket booths operating instead of two at the busy periods of the exhbition please?

While many of the layouts at the exhibition had been on the exhibition circuit quite a few times before (no, Brisbane Waters from the Epping Club missed out this year and was replaced by the more recent Brunswick Park layout). But there were  a couple of new arrivals. The layouts that most caught my eye included the following:

The NSW O scale (7mm) layout Arakoola was very well presented. It follows the familiar NSW branch line format popular in HO scale but this time double the scale size. There certainly is the impression of weight and power when you see these O scale trains in operation, at realistic speeds, on a nicely scenicked layout. The layout is 17 metres in length and operated by digital command contril (DCC).

A G scale layout, Shady Hollow, featured a logging and forestry scene. It was amazing how much detail could be accomplished in such a relatively small layout size for a G scale exhibit.

Barcoola from the Bayside Model Railway Club represents the junction of the Trans Australian Railway and the Central Australian Railway and featured Australian National locomotives and trains. The layout is long which allows for some very lengthy trains. The layout is operated by DCC.

On a much smaller layout was the compact but well detailed Broxburn Sidings. This OO scale (4mm) layout is a small shunting layout with a freelanced Australian theme (Quinton River). Interestingly, the locos and rollingstock use Alex Jackson couplers, popular among British model railway folk. Having come all the way from Queensland, Broxburn Sidings was a nice addition to the Sydney exhibition.

A new layout to the Sydney Exhibition was Mungo Scott's, based on the iconic flour mill on the Metropolitan Goods Line in Sydney. This layout was built over a fifteen month period by members of the Arncliffe Model Railway Society (formerly Sydney Model Railway Society).

Wallerawang from the Guildford Model Railway Group is a good solid exhibition layout. The station building and footbridge are standouts, but the rest of the layout is well modelled and presented as well. For more information, try http://www.gmrg.org.au/

Oddwalls is another NSW-based HO scale layout, having started the exhibition circuit earlier this year. I enjoyed looking at the layout when I first saw it, and I still enjoy the detail in the layout now. The layout also presents very well and is a good size for both setting up and for viewing.

The good-hearted chaps from the Illawarra Model Railway Association were there with their US-based layout Kelly River. Kelly River features an operating Bascule Bridge and gauntlet track. You can find more information about this layout at www.imra.org.au/kelly.html

Still one of my favourite exhibition layouts, and still going strong, was the HO scale layout, Dungog. Dungog is an actual town located about 80km north of Newcastle and is famous as the birthplace of NSW and Australian cricketer, Doug Walters. I must say I find myself looking on the layout for a chap or a kid with a cricket bat somewhere but have yet to see it. The layout uses photographs from the Dungog district which are very effective. At the left hand end of the layout (when viewed from the front) is Martin's Creek and the quarry, while at the opposite end is the butter factory. Dungog is very nicely composed layout with some great scenery, buildings, and bridges.

Another layout on show that I liked, but unfortunately the photos were not of sufficient quality to produce here, was the HO scale Tasmanian Railways Avoca. Having a layout based on Tasmanian Railways (the Fingal Valley) was something different to see and something to be encouraged for the future.

And for the kids, there was the popular Lego layout, Brickston Valley.

The exhibition was certainly well attended on the Saturday. I enjoyed my time there looking at layouts, checking out some of the commercial outlets, and chatting to various modellers throughout the day. I trust the exhibition organisers were happy with the three day show.